Braided Fuel
 |
 RB Innovations Braided Fuel Line Kit Yellow  US $12.99
|
 RB Innovations Braided Fuel Line Kit 24 Yellow US $9.79
|
 iNTEGY C22905 Braided Fuel Line for LOSI LST2 Others INTTC22905 FREE SHIPPING US $8.89
|
 iNTEGY Braided Fuel Line for Losi LST2 US $7.99
|
 Integy Braided Fuel Line SAVX US $7.99
|
 NEW Integy Braided Fuel Line Traxxas Revo C22908 NIB US $7.49
|
 Integy Braided Fuel Line HPI Savage US $6.97
|
 Integy Braided Fuel Line Traxxas Revo US $6.79
|
 Integy Braided Fuel Line SAVX INTC22935 US $6.69
|
 Integy Braided Fuel Line Revo INTC22908 US $6.69
|
Priority Gauges For Your Mustang - How to Install Your Priority Gauges and Gauge Pods
Selecting the type of gauge to install for your supercharger, like the mustang must compensate for performance as well as style and beautification, whether you are opting for a triple pod installation-the very popular one-or the single on your dashboard or A-pillar gauge all must meet performance needs especially for sophisticated rods like the Mustang.
In installing gauge on your car you'll want to keep abreast of the changes going on under the hood as you pedal, so the pods have to well positioned and well and effectively lighted for the gauge to serve you. For the mustang there are lots of Engine variables, performance derivatives that will have to go into display at the gauges. For a supercharger like the mustang there are key priority that will have to go into consideration when choosing gauges and pods to install them; the first is the fuel gauge, this makes sure that there is always a sufficient fuel pressure under every boost. To install this run two lenghts of braided lines supplied by the auto meter. Use an isolator to keep the fuel out of the passenger compartment, the fuel pressure supply will be taken from the fuel rail. like the rest of the gauge, illumination of the gauge facing should be taken from the factory lighting. This way the gauge face lights up when you when you turn on the lights, locating a suitable power source would only take you a minute if you have a nack for fix-it-myself.
The second is EGT (exhaust temperature gauge) this gauge can detect problems in the air/fuel mixture by displaying temperature; installing the EGT requires drilling and tapping a hole into the down pipe. Remove the down pipe, drill and tap for probe fitting and install back on the engine. Now run the wiring for the probe through thhe engine compartment and through the grommet in the firewall. then wiring from the gauge, the probe and a power source will be run to the temperature module.
The Ultra boost the last priority gauge to be installed serves a great deal of purpose too,gives you constant check on the boost pressure. This is important because sudden changes in pressure can mean damage to the blower, a vacuum leak or other problems. Installing the last gauge on the A-pillar triple gauge pods required running a plastic boost line from the back of the gauge to a suitable vacuum source. if the supercharger available in your mustang does not come with a hole for a suitable vacuum source drill one and tap the hole for boost gauge fitting. Common error in running the plastic leaves the line vunerable to the heat of the hot surfaces and once the engines start running the ensuing damage will result in a vacuum leak. With a little help from the neighbourhood work shop fine touches may be done on the rest.
For Enthusiastic home mechanics that want to install their gauge pods all by themselves I've put up a step-by-step video tutorial by Nathan Hilton that will help through your whole installation.
Visit http://gaugemechanics.yolasite.com
About the Author
The Author of this article Garad V. Co-Authors an Automotive blog at www.gaugemechanics.yolasite.com
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.